Beam smoke detector FIRERAY 3000 Exd

Beam smoke detector FIRERAY 3000 Exd
Art.No.: FIRERAY 3000 Exd
Manufacturer: Fireray
Products category: Intrinsically safe
Additional information about the product
+370 5 2363599
Contact details (Please complete all fields marked with a *)

  • The Fireray® 3000 Exd is ideally suited for the protection of large areas, with potentially explosive atmospheres, against smoking fires. Fireray® 3000 Exd comprises an infra-red transmitter and a receiver, both of which are ATEX-certified for use in Group 2 hazardous areas.
  • The product is designed for large enclosures within oil rigs, refineries, ordnance stores and similar premises. It provides an early warning of smouldering or strongly smoke-generative fires, which may not be picked up by flame detectors installed in many hazardous areas.
  • Allows for 2 Detectors per System Controller
  • Separate Fire and Fault Relays per Detector
  • Range 5 to 100 metres, (16.4042ft to 328.084ft) configurable per set of Detectors
  • Integral Laser Alignment in Receiver
  • 2-wire Interface between Controller and Receiver
  • Remote/low Level Controller with LCD display (Safe Area)
  • Programmable Sensitivity and Fire/Fault delay
  • Contamination Compensation for dust and building movement
  • Complies with ATEX and EN54:12
  • Approvals: EN54:12, ATEX, Ex II 2GD, Ex db op is IIC T6 Gb, Ex tb IIIC T85°C Db
Parameters Values
Range, m 5-100
Relative Humidity 93%
Relay contact VFCO 2A @ 30 Volts DC resistive
Current Controller: 14 mA ; Transmitter: 8 mA
LED indication Control Unit: Red - Fire, Amber - Fault, Green - System OK ; Receiver: alignment LEDs for single person alignment.
Wave lenght 850nm
Voltage 12 to 36V DC ±10%
Protection rating (IP) Controller: IP54; Transmitter/Receiver: IP66
Working temp. (°C Min/Max) -10/+55
Weight, kg Control Unit: 606g, transmitter: 3,7kg, receiver: 3,7kg
Beam smoke detector FIRERAY 3000 Exd datasheet